BM/GF Hybrid

A forum to discuss one pot automated brewing systems.
Post Reply
User avatar
Nashbrew
Piss Artist
Posts: 162
Joined: Thu Mar 04, 2021 4:21 pm
Location: The Shire UK

BM/GF Hybrid

Post by Nashbrew » Wed Apr 21, 2021 10:18 am

Has anyone out there with a BM dumped the Speidel controller and bolted on a Grainfather controller?
This looks like a good option for failed BM controllers. A BM one is £400 GF is £100 a no brainer if the idea works.
Falling apart together nicley🍻

User avatar
MashBag
Even further under the Table
Posts: 2140
Joined: Wed Oct 23, 2013 7:13 am

Re: BM/GF Hybrid

Post by MashBag » Thu Apr 22, 2021 7:53 am

Nash, you know I have been banging on about this for a while. But have never seen any takers.

Happy to give you a hand with conversion.

Be the first to have a grain-meister!

User avatar
MashBag
Even further under the Table
Posts: 2140
Joined: Wed Oct 23, 2013 7:13 am

Re: BM/GF Hybrid

Post by MashBag » Thu Apr 22, 2021 7:55 am

Would make a great thread to help others.

User avatar
Mashman
Lost in an Alcoholic Haze
Posts: 675
Joined: Sun Jul 16, 2006 7:00 pm
Location: Canterbury, Kent

Re: BM/GF Hybrid

Post by Mashman » Thu Apr 22, 2021 8:56 am

I would be interested in this when the condensation finally kills my Brau- mister.
M
Two Valleys Brewery

Brewing up trouble

User avatar
Nashbrew
Piss Artist
Posts: 162
Joined: Thu Mar 04, 2021 4:21 pm
Location: The Shire UK

Re: BM/GF Hybrid

Post by Nashbrew » Thu Apr 22, 2021 10:01 am

I will definitely go for it when my steamed up controller dies.
I did think Grain-Meister or the Brau-Father as names
Falling apart together nicley🍻

User avatar
Nashbrew
Piss Artist
Posts: 162
Joined: Thu Mar 04, 2021 4:21 pm
Location: The Shire UK

Re: BM/GF Hybrid

Post by Nashbrew » Thu Apr 22, 2021 10:04 am

I see Grooves on the BM site has gone with buy the bits make your own route.

does anyone know if a GrainFather turns the pump on & off automatically? And at what Temp does it stop on the boil?
Falling apart together nicley🍻

User avatar
MashBag
Even further under the Table
Posts: 2140
Joined: Wed Oct 23, 2013 7:13 am

Re: BM/GF Hybrid

Post by MashBag » Fri Apr 23, 2021 3:13 pm

80C is when it cuts out from memory

User avatar
Nashbrew
Piss Artist
Posts: 162
Joined: Thu Mar 04, 2021 4:21 pm
Location: The Shire UK

Re: BM/GF Hybrid

Post by Nashbrew » Mon Apr 26, 2021 1:34 pm

Is that the BM or GF Mash?
Falling apart together nicley🍻

aamcle
Drunk as a Skunk
Posts: 904
Joined: Tue Jan 15, 2013 11:42 am
Location: Newton-le-Willows ( St Helens/Warrington)

Re: BM/GF Hybrid

Post by aamcle » Mon Apr 26, 2021 1:53 pm

You might what to consider a CraftBeerPi control box.

aamcle

User avatar
Nashbrew
Piss Artist
Posts: 162
Joined: Thu Mar 04, 2021 4:21 pm
Location: The Shire UK

Re: BM/GF Hybrid

Post by Nashbrew » Mon Apr 26, 2021 2:17 pm

Hi aamcle
I did email them with some programming questions but they never got back to me.
Falling apart together nicley🍻

User avatar
LeeH
Under the Table
Posts: 1921
Joined: Wed Jan 11, 2012 9:42 pm
Location: North Lincs
Contact:

BM/GF Hybrid

Post by LeeH » Sat May 01, 2021 2:16 pm

It won’t be difficult, BM is a PT1000 so you may need to source a probe to fit or at least change the element inside.

Other then that you have a pump (not sure of the voltage) and the heating element.
Sabro Single Hop NEIPA 25/02/20 CLICK ME to monitor progress with Brewfather & iSpindel

Post Reply