Klarstein Mundschenk power settings

A forum to discuss one pot automated brewing systems.
clarets7
Piss Artist
Posts: 231
Joined: Sun Sep 16, 2018 8:56 am
Location: Hebden Bridge, West Yorkshire

Re: Klarstein Mundschenk power settings

Post by clarets7 » Thu Oct 07, 2021 7:26 pm

Traced it through, two lines coming direct from the N76E003AT20 on the display board, P700 and P1800, go to the relay board via the ribbon then to a single transistor for each relay, no other lines to those. Something strange going on inside the micro - and it definitely used to work. On the faulty board it just switches both relays on whatever the power setting, but will switch them both off when it hits temperature. It's as if the power setting part of the program is no longer talking to those lines.
"The paradise of the rich is made out of the hell of the poor" - Victor Hugo

User avatar
MashBag
Even further under the Table
Posts: 2140
Joined: Wed Oct 23, 2013 7:13 am

Re: Klarstein Mundschenk power settings

Post by MashBag » Thu Oct 07, 2021 8:48 pm

That does sound like internal chip failure.

Post Reply