Cheap and easy to make hop back.
-
- Steady Drinker
- Posts: 65
- Joined: Mon Sep 09, 2013 10:23 am
Cheap and easy to make hop back.
After trying all sorts of biabs homemade and bought, I cut habit of75mm water pipe,PVC, and cut a dozen hacksaw slots halfway through it, and wedged it in my mash run across the bottom inside between the back of the outlet tap and the opposite wall of the vessel,an old 23l fementer'it works better than any biab, and is easy to clean.
-
- Steady Drinker
- Posts: 65
- Joined: Mon Sep 09, 2013 10:23 am
Re: Cheap and easy to make hop back.
If it is good enough for a drinking water supply it should be good enough for malt at 66 deg.c for 1.5 hr mash, after all most home brew kits are fermented in plastic.
Re: Cheap and easy to make hop back.
Drinking water suitable sounds good. Some plastics can leach affecting flavours, some plastics are made from recycled material that could have contained anything (toxic metal compounds perhaps). Food safe plastics should be free from either of those problems.
I brew therefore I ... I .... forget
-
- Steady Drinker
- Posts: 65
- Joined: Mon Sep 09, 2013 10:23 am
Re: Cheap and easy to make hop back.
you could use abit of stainless steel if you like.