My hard work

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
Stanna
Steady Drinker
Posts: 91
Joined: Thu May 28, 2015 7:55 am

My hard work

Post by Stanna » Fri Jun 26, 2015 10:50 am

As suggested by Jim some pics of the 50l setup I've just made.
Attachments
image.jpg
image.jpg
image.jpg
image.jpg
image.jpg
Top
User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Re: My hard work

Post by Jim » Fri Jun 26, 2015 11:54 am

Very nice! 8)

That's a big chiller!
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter
Top
Stanna
Steady Drinker
Posts: 91
Joined: Thu May 28, 2015 7:55 am

Re: My hard work

Post by Stanna » Fri Jun 26, 2015 5:04 pm

I know Jim, didn't know when to stop, I was in the zone :shock:
Top
Dave S
Even further under the Table
Posts: 2514
Joined: Sun Apr 01, 2012 5:38 pm
Location: Wirral, Merseyside

Re: My hard work

Post by Dave S » Sat Jun 27, 2015 9:56 am

Jim wrote:Very nice! 8)

That's a big chiller!
It certainly is. How much pipe did you use? I'm thinking of making another one as the current one might be a little short in my new boiler, (when it's finished).
Best wishes

Dave
Top
Stanna
Steady Drinker
Posts: 91
Joined: Thu May 28, 2015 7:55 am

Re: My hard work

Post by Stanna » Sun Jun 28, 2015 10:29 am

10 mts of 10mm soft copper.
Top
Dave S
Even further under the Table
Posts: 2514
Joined: Sun Apr 01, 2012 5:38 pm
Location: Wirral, Merseyside

Re: My hard work

Post by Dave S » Sun Jun 28, 2015 10:46 am

Stanna wrote:10 mts of 10mm soft copper.
10m? Looks like at least twice that. What diameter is it?
Best wishes

Dave
Top
User avatar
GrowlingDogBeer
Even further under the Table
Posts: 2671
Joined: Tue Aug 17, 2010 5:20 pm
Location: Wickford, Essex
Contact:
Contact GrowlingDogBeer

Re: My hard work

Post by GrowlingDogBeer » Sun Jun 28, 2015 10:49 am

Dave S wrote:
10m? Looks like at least twice that. What diameter is it?
Thats what I was thinking. There are 34 coils so if it's only 10 meters of pipe that would give it a 9cm diameter, it looks a lot bigger than that.
Top
Stanna
Steady Drinker
Posts: 91
Joined: Thu May 28, 2015 7:55 am

Re: My hard work

Post by Stanna » Wed Jul 01, 2015 9:31 pm

Hi all, it's 10mm diameter and was formed round a standard 5 liter paint tin, the uprights are 15mm.
Top
Post Reply

Return to “Brewing Equipment”