My electrim boiler is to become my HLT for my new purchase the Grainfather.
A tap with greater flow is what I am after.
Has anyone done this and able to share thoughts please?
Thanks
Tap with greater flow to replace electrim tap
Re: Tap with greater flow to replace electrim tap
I did the same thing with an old boiler.
I installed a 15mm lever ball valve.
I used a tank connector and a 1/2" bsp socket.
I have also added a 12v solar pump and I can set the pump rate to allow a steady continuous sparge.
These are the parts you need.
https://www.screwfix.com/p/compression ... 5mm/82376
https://www.screwfix.com/p/lever-ball- ... mm/67744
https://www.screwfix.com/p/female-socket-x/71287
I installed a 15mm lever ball valve.
I used a tank connector and a 1/2" bsp socket.
I have also added a 12v solar pump and I can set the pump rate to allow a steady continuous sparge.
These are the parts you need.
https://www.screwfix.com/p/compression ... 5mm/82376
https://www.screwfix.com/p/lever-ball- ... mm/67744
https://www.screwfix.com/p/female-socket-x/71287
Re: Tap with greater flow to replace electrim tap
Brilliant. Thanks very much gobuchul