Inkbird itc100 error code

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
lancon
Sober
Posts: 8
Joined: Sat Jan 05, 2013 2:30 pm

Inkbird itc100 error code

Post by lancon » Fri Mar 11, 2022 6:48 pm

I had an itc 106vh but it shorted, and started throwing out A100 error code in the SV box. I bought a new 100RH and it is doing the same. Any ideas?

thanks

User avatar
ozroger
Steady Drinker
Posts: 56
Joined: Tue Jan 25, 2022 11:10 am
Location: Australia

Re: Inkbird itc100 error code

Post by ozroger » Sat Mar 12, 2022 1:45 am

I don't have one of these, but on the Auber PID controller I used to have, the AC voltage terminals simply switch the Active line on or off. In other words, the active from the power point goes onto one of the AC terminals, and the other terminal connects to the appliance/heating element/whatever.

My immediate thought is that you might be putting the active on one, and the neutral on the other?

User avatar
themadhippy
Even further under the Table
Posts: 2951
Joined: Tue Dec 08, 2009 12:53 am
Location: playing hooky

Re: Inkbird itc100 error code

Post by themadhippy » Sat Mar 12, 2022 2:02 am

Are you using the same sensor? might be faulty hence the same error message.
Warning: The Dutch Coffeeshops products may contain drugs. Drinks containing caffeine should be used with care and moderation

User avatar
MashBag
Even further under the Table
Posts: 2140
Joined: Wed Oct 23, 2013 7:13 am

Re: Inkbird itc100 error code

Post by MashBag » Sat Mar 12, 2022 9:09 am

+1 I think it's a sensor.

Chris Brooks
Steady Drinker
Posts: 32
Joined: Wed Mar 02, 2022 3:20 pm

Re: Inkbird itc100 error code

Post by Chris Brooks » Tue Mar 15, 2022 8:22 pm

What colour are the wires to the plug?

Post Reply