[solved]Pressure regulator connection

[man_beach]

Hope someone can help. I've got one of these on my Kegland MK4 gas regulator. It's the gas out. I want to get another one - but what is it called? If I knew what it was, I'd be able to do a Google or ebay search. (Alternatively, where can I buy one.)

[MashBag]

Forget homebrew. That's standard stock.

Google "Female Barb Hose Fittings"

You will need to work out the size...

[man_beach]

Thanks, Mashbag. They're coming up on my searches.

[MashBag]

Just for info... What size is it?

[man_beach]

I believe it to be 1/4". There was a John Guest connector included with the regulator, it's got a product code of (what appears to be) P NSF 51 46 3/8" on the end. I think that the 3/8" refers to the hose size. Still Googling the code, but the thread OD is approx 11mm

[man_beach]

Further research suggests that the John Guest fitting that I have is a "John Guest Female Adaptor 3/8 inch Tube OD x 1/4 FFL Thread" and the thing I am looking for is a "1/4" FFL 1/4" barbed swivel nut" which are readily available on ebay.

[MashBag]

Smashing thanks.

[f00b4r]

Further research suggests that the John Guest fitting that I have is a "John Guest Female Adaptor 3/8 inch Tube OD x 1/4 FFL Thread" and the thing I am looking for is a "1/4" FFL 1/4" barbed swivel nut" which are readily available on ebay.

You might want to consider using these with them; they help prevent leaks with those fittings. They are available in the UK.