Brutus 2.0e

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
cqout
Piss Artist
Posts: 226
Joined: Sun Nov 08, 2009 8:41 pm

Brutus 2.0e

Post by cqout » Sat Jan 24, 2015 6:19 pm

I have decided to make a hard plumbed brutus 2.0e using my electric control panel I made. Another afternoons work and brutus is plumbed - just electrics to finish then trial run!

Exciting times!
here is a quick picture

Image


And the panel
I will need to change some of the tags!


Image
BossTronix 1 15 gallon pot brewery
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade

chris2012
Under the Table
Posts: 1193
Joined: Sat Jun 23, 2012 10:13 pm

Re: Brutus 2.0e

Post by chris2012 » Sat Jan 24, 2015 6:25 pm

Nice! Is that a RIMS tube I can see too? If so, did you make it, or where did you get it from?

cheers

Chris

cqout
Piss Artist
Posts: 226
Joined: Sun Nov 08, 2009 8:41 pm

Re: Brutus 2.0e

Post by cqout » Sat Jan 24, 2015 6:39 pm

Yes that is a rims tube - i will use it as extra heating power and a backup should the other fail - i got the rims from mrlard at home brew builder - he is brilliant
BossTronix 1 15 gallon pot brewery
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade

Belter

Re: Brutus 2.0e

Post by Belter » Sun Jan 25, 2015 9:50 pm

Looks awesome!

One thing though. I thought rims tubes had to be mounted horizontally? I've seen previous posts of them burning out mounted vertically?

chris2012
Under the Table
Posts: 1193
Joined: Sat Jun 23, 2012 10:13 pm

Re: Brutus 2.0e

Post by chris2012 » Sun Jan 25, 2015 9:57 pm

Hmmm, not sure why that'd be the case Belter? I always use mine vertically, below the mash tun.

Belter

Re: Brutus 2.0e

Post by Belter » Sun Jan 25, 2015 10:17 pm

Not sure either but I've seen it.

I use my horizontally for that reason.

I'll try and dig it out

cqout
Piss Artist
Posts: 226
Joined: Sun Nov 08, 2009 8:41 pm

Re: Brutus 2.0e

Post by cqout » Sun Jan 25, 2015 10:29 pm

Cheers for the replies guys - i would also be interested un info on mounting the rims tube horizontal - i dont want to damage my element and it is not to late to replumb it

Chris
BossTronix 1 15 gallon pot brewery
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade

Belter

Re: Brutus 2.0e

Post by Belter » Sun Jan 25, 2015 10:33 pm

I've searched for the post and I cant find it. It was a few years ago. There was an immersion element enclosure people were buying on eBay. One failed the test and the reason was that it was vertical. Or I could be way off and remembering wrong

Belter

Re: Brutus 2.0e

Post by Belter » Sun Jan 25, 2015 10:40 pm

The good news is I'm completely wrong.

Found the thread:
viewtopic.php?f=6&t=59683&hilit=Rims&start=60

cqout
Piss Artist
Posts: 226
Joined: Sun Nov 08, 2009 8:41 pm

Re: Brutus 2.0e

Post by cqout » Sun Jan 25, 2015 11:14 pm

Cheers belter
BossTronix 1 15 gallon pot brewery
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade

User avatar
Wonkydonkey
Drunk as a Skunk
Posts: 847
Joined: Sat Mar 01, 2014 9:37 am
Location: In the Stables

Re: Brutus 2.0e

Post by Wonkydonkey » Mon Jan 26, 2015 2:32 am

Umm, Nice panel, looks a bit like the one I have in mind to build, but won't be as big as yours. :wink:

Still, I know there's a lot of planning involved in building one, so well done. =D>
To Busy To Add,

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: Brutus 2.0e

Post by orlando » Mon Jan 26, 2015 8:28 am

Belter wrote:The good news is I'm completely wrong.

Found the thread:
viewtopic.php?f=6&t=59683&hilit=Rims&start=60
Relieved to read that as I use mine the same way, as long as the pump runs your fine, but that's the case whatever the orientation. I have had a couple of scares with mine where the element has overheated due to my mistakes but the quality of these elements has come to my rescue. Lardy makes these in two pieces now, take a look. I'm also looking forward to getting my s/s head pumps back too, how are yours (OP) performing?

Image
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

chris2012
Under the Table
Posts: 1193
Joined: Sat Jun 23, 2012 10:13 pm

Re: Brutus 2.0e

Post by chris2012 » Mon Jan 26, 2015 2:11 pm

Belter, yeah that's the thread I screwed up in heh. I now always make sure to keep it below the mash tun.

Post Reply