Braumeister fermenting lid
Re: Braumeister fermenting lid
Recipe was quite a simple one
Pale malt
Crystal
Chocolate.
Hops
Willliamette.
Bobek
Wilko's yeast.
The only thing that was different I tried Harris starbrite.
It was stronger than usual though. This is probably down to not having the overnight/brew and ferment dialled in yet.
Pale malt
Crystal
Chocolate.
Hops
Willliamette.
Bobek
Wilko's yeast.
The only thing that was different I tried Harris starbrite.
It was stronger than usual though. This is probably down to not having the overnight/brew and ferment dialled in yet.
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Is Harris starbrite the Vegan one? That shouldn't affect it.
Re: Braumeister fermenting lid
Yes Mashy i think it is.
Drank it last night and was fine must have been something in me supper.
Drank it last night and was fine must have been something in me supper.
- Attachments
-
- 20211025_202607.jpg (2.29 MiB) Viewed 4258 times
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Are you sticking with fermentation in the BM?
I can't believe I have missed this for so long. I quite like not having a huge brewday and all the extra cleaning up.
Re: Braumeister fermenting lid
Hi Mash
Yes did a brew last night.
Only one glitch,the BM missed a 2 hour step was pinging away at me 6 o'clock this morning.
All cleaned up and yeast pitched by 8.
Yes did a brew last night.
Only one glitch,the BM missed a 2 hour step was pinging away at me 6 o'clock this morning.
All cleaned up and yeast pitched by 8.
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Excellent news. I did wonder if you had been put off by "dreamy beer".
You might see on another thread I am looking for a rising table to make life easier.
You might see on another thread I am looking for a rising table to make life easier.
Re: Braumeister fermenting lid
I just have a lower shelf ,will post a pic later.
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Just running a double brew to test a thought.. "does the trub rob the hop flavours"
Brew A brewed in the BM20 as normal.
Brew B day two before pitch, dropped the wort out to a couple stainless buckets (thanks icebox - you started this), rinsed (not a deep clean) the BM and then poured back.
Let's see...
I know reading this some off your are screaming..... Let me know what you think
Re: Braumeister fermenting lid
Hi Mash
I am sold on the overnight and ferment thing.
My beer just got a public outing:
https://abingdonblog.co.uk/?p=29106
And went down very well (all gone)
Not sure I would be pulling it out and putting it back in again may as well go srtraight into a fermenter.
I am sold on the overnight and ferment thing.
My beer just got a public outing:
https://abingdonblog.co.uk/?p=29106
And went down very well (all gone)
Not sure I would be pulling it out and putting it back in again may as well go srtraight into a fermenter.
Falling apart together nicley🍻
Re: Braumeister fermenting lid
I too am sold. Very sold.
This test is more for me to prove to myself there isn't an issue, if I am honest.
It is the final check before a mod. I am adding an independent heating pad to the bottom of the BM. 240v/60w. Last few brews have been in prototype mode.
I bought a couple of stainless buckets for the rinse and return which made it very easy. Lower pumped tap helps. Really surprised at want a small amount of trub that came through.
Added course Irish moss direct to the brew to hold it (trub) together.... Might have helped.
This test is more for me to prove to myself there isn't an issue, if I am honest.
It is the final check before a mod. I am adding an independent heating pad to the bottom of the BM. 240v/60w. Last few brews have been in prototype mode.
I bought a couple of stainless buckets for the rinse and return which made it very easy. Lower pumped tap helps. Really surprised at want a small amount of trub that came through.
Added course Irish moss direct to the brew to hold it (trub) together.... Might have helped.
Re: Braumeister fermenting lid
As expected the brew is clearer going into the bottles on day 7. Let's see how the taste test goes.
Committed to fermenting in the BM, I have yesterday installed an adhesive 220v/60w heater pad, under the thermal jacket. The hope is high temp glue survives boil
Committed to fermenting in the BM, I have yesterday installed an adhesive 220v/60w heater pad, under the thermal jacket. The hope is high temp glue survives boil
Last edited by MashBag on Fri Jul 01, 2022 8:15 am, edited 1 time in total.
Re: Braumeister fermenting lid
Here it is.
A three pin aviation connector for the pad to connect to the inkbird.
A three pin aviation connector for the pad to connect to the inkbird.
Last edited by MashBag on Fri Jul 01, 2022 8:14 am, edited 1 time in total.
Re: Braumeister fermenting lid
And here is the pad stuck to the wall under the jacket.
Re: Braumeister fermenting lid
Hi Mash
Hope this plan works out for you what Tempeture are you fermenting at if you need a heater?
Hope this plan works out for you what Tempeture are you fermenting at if you need a heater?
Falling apart together nicley🍻
Re: Braumeister fermenting lid
A tight 19c ±0.3 in an unheated outhouse.