200L Brewery (The new, NEW plan)

[haz66]

I cant be bothered with any photo`s at this time of night, but
Floor got painted, electrics were done, and equiptment was started to move in ,
but i still need to build the stand for the vessles before i can move them in,thats tomorrows
(well todays) job.

[haz66]

All electric working


Beer cooler, for FV`s


And again with my attemp at building a prep table above it.


Gas ring and bottle (and mop bucket ?)


1 of 3 FV`s


With tap fitted


And the inside, i had to add the tube to get it nearer to the bottom


Still no stand so no shineys in there as yet, hopefully this weekend.

[leedsbrew]

Looking good matey!

[rick_huggins]

Spot on Mark, well done

[oblivious]

Yea its really coming together

[haz66]

Cheers guys.

I`ve also ordered some 2" plastic outlets for the FV`s so i can rinse them out easier once
the beer is kegged, boy they took some finding but really wanted to include an outlet in the bottom
so i could get rid of all the thrub.

If anyone is thinking of something similar heres where i`ve ordered them from
Clicky

and this is the product
1411-21-07 Threaded plastic bulkhead 805 outlet 47 X 64mm X 2" M

[haz66]

Well after almost a month with no real progress, due to work and other things.
Things are moving again today, i finally got my stands finished and in place,
I`m just about to set off to start moving the shinnys in, 3 trips required.
I`ll take and post some photos later on.

[rick_huggins]

Good man, looking forward to see those tins in situ mate

[haz66]

The first of the shinneys is in


Soon followed by its brother


And then by its sister


All three happily sat there,(but the mash tun is now in the middle)


The False Bottom placed into the Tun


Taps fitted and leak tested


Spinny sparge arm rigged up


First pump rewired and attached to the stand


Close up of pump


Also started on the pump switch board but not got that far with it yet.

[leedsbrew]

Looking sh!t hot there haz!!! I'm only over in Guiseley, any chance of coming over when it's all up and running?

[rick_huggins]

Cooking with gas; quite literally mate!

Well done, looking forward to the first brew day!!

[haz66]

Looking sh!t hot there haz!!! I'm only over in Guiseley, any chance of coming over when it's all up and running?

No problem at all.

[haz66]

Cooking with gas; quite literally mate!

Well done, looking forward to the first brew day!!

First test brew should only be (depending on how well England do in the world cup) not that far away now.

[Aleman]

Looking really nice . . . got to love those Shiney. . . The gas Burner looks like the 350 mm Paella Burner from Hamilton Gas, any chance of a clearer/closer look at the flame holes on the inner and outer rings? . . . .

I'm trying to decide on a new burner for my 150L boiler . . . which has a big centre bottom drain (75mm dia) that I am trying to avoid directing flame onto . . . And I can't decide on a burner for it. I like the look of the 530mm triple burner, but ATM it looks as though the 400 mm burner is going to be best as it means I can have a 200mm hop stopper placed centrally and have no flame heating under that (more or less).

My 'pot' is 560mm diameter which is why I think the 530mm burner will be too big, I'll get too much waste heat up the sides . . . even with a heat shroud fitted . . . plus the 530 triple is a big jump in price.

Also what regulator are you using . . . I'm trying to decide on the 37 mBar 4Kg/Hour one or the 50 mBar one which is only rated for up to burners up to 9KW (The 400mm is 11KW), but there is always the 50-150 mBar Adjustable One, which is good for up to 4Kg/Hour . . .. . But needs other fittings

So far I think my order is

B-400 400mm Paella Gas Burner
HA9606 LPG 50-150 mbar Comap Propane Gas Regulator
HA326 20” Propane Gas Pigtail POL x 1/4" Bspm T
HA303 Fulham Gas Hose Nozzle x 3/8” BSP Male
HA132 8.3mm LPG High Pressure Gas Hose
SEC3 8.3mm Single Ear Hose Clip

but just need someone to cast an eye over it to see if I have forgotten anything

[WishboneBrewery]

So when is the Grand opening with a BBQ & Free beer