Eccentric Engineer AG Brewday

Had a good one? Tell us about it here - and don't forget - we like pictures!
Post Reply
User avatar
sweatysock
Piss Artist
Posts: 197
Joined: Tue Sep 25, 2012 6:52 pm
Location: Fareham, Hampshire

Eccentric Engineer AG Brewday

Post by sweatysock » Sun Feb 01, 2015 11:57 pm

Getting set up for a brewday tomorrow. All the water is ready to go and treated with CRS and will be set on a timer to be about 80 degrees by 0700. I will then decant the required amount into a cold mash tun and let the temp settle down to the strike temp before putting in the grain. The grain is all ready to go as is the yeast. The yeast has been in the fridge for a year now (split from a new White labs vial) and gave it a go. Nothing to lose. Put it in a 500/ 50 water/ spray malt and nothing much happened. Upped with a 1000/ 100 mix and remembered the yeast nutrient this time. It looked very poorly then went off like a rocket so will give it a go.

It will be a busy day as I also have a beer in the FV that I will need to bottle while the mash is on. All the bottles have star san in the already so should not be too much of a drama.

Here is the recipe:

Brewlength is 23Ltrs.

Eccentric Engineer (English IPA)

Original Gravity (OG): 1.039 (°P): 9.8
Final Gravity (FG): 1.012 (°P): 3.1
Alcohol (ABV): 3.58 %
Colour (SRM): 10.7 (EBC): 21.0
Bitterness (IBU): 43.3 (Average)

81.71% Maris Otter Malt
6.1% Caragold
6.1% Wheat Malt
4.88% Crystal 80
1.22% Chocolate

1.1 g/L Challenger (6.1% Alpha) @ 90 Minutes (Boil)
1.1 g/L Progress (7.3% Alpha) @ 90 Minutes (Boil)
0.9 g/L East Kent Golding (4.7% Alpha) @ 10 Minutes (Boil)
1.1 g/L East Kent Golding (4.7% Alpha) @ 0 Minutes (Boil)


Single step Infusion at 66°C for 90 Minutes. Boil for 90 Minutes

Fermented at 20°C with WLP001 - California Ale


Recipe Generated with BrewMate
Last edited by sweatysock on Mon Feb 02, 2015 9:03 am, edited 1 time in total.
Sandy Bottoms Brewery
Drinking:
KK 1: MT
KK 2: MT

Without beer we would be mere machines!

User avatar
seymour
It's definitely Lock In Time
Posts: 6390
Joined: Wed Jun 06, 2012 6:51 pm
Location: Los Alamos, New Mexico, USA
Contact:

Re: Eccentric Engineer AG Brewday

Post by seymour » Mon Feb 02, 2015 3:42 am

Challenger & Progress, baby!!! Well played.

User avatar
sweatysock
Piss Artist
Posts: 197
Joined: Tue Sep 25, 2012 6:52 pm
Location: Fareham, Hampshire

Re: Eccentric Engineer AG Brewday

Post by sweatysock » Mon Feb 02, 2015 9:03 am

First set back of the day - timer was set wrong and did not work. Water just heating up now!
Sandy Bottoms Brewery
Drinking:
KK 1: MT
KK 2: MT

Without beer we would be mere machines!

User avatar
sweatysock
Piss Artist
Posts: 197
Joined: Tue Sep 25, 2012 6:52 pm
Location: Fareham, Hampshire

Re: Eccentric Engineer AG Brewday

Post by sweatysock » Mon Feb 02, 2015 10:08 am

Did not take long to heat the water. For interest it lost 6 degrees being decanted into the mash tun.

Grain in an hit the mash temp bang on. Now to get the bottling done!
Attachments
image.jpg
Water cooling to strike temperature
Sandy Bottoms Brewery
Drinking:
KK 1: MT
KK 2: MT

Without beer we would be mere machines!

User avatar
sweatysock
Piss Artist
Posts: 197
Joined: Tue Sep 25, 2012 6:52 pm
Location: Fareham, Hampshire

Re: Eccentric Engineer AG Brewday

Post by sweatysock » Mon Feb 02, 2015 2:08 pm

Boil now on and 90 min hops added. Only one more mishap - tap left open. First time I have done that for a while.

Yeast is also ready to go and managed to fill 40 bottles of the previous brew during the mash.
Attachments
image.jpg
Yeast
image.jpg
Boiler going.
Sandy Bottoms Brewery
Drinking:
KK 1: MT
KK 2: MT

Without beer we would be mere machines!

User avatar
sweatysock
Piss Artist
Posts: 197
Joined: Tue Sep 25, 2012 6:52 pm
Location: Fareham, Hampshire

Re: Eccentric Engineer AG Brewday

Post by sweatysock » Mon Feb 02, 2015 6:40 pm

Went a little over and got 24 litres . All tucked up for a couple of weeks in the fermenting fridge.
Sandy Bottoms Brewery
Drinking:
KK 1: MT
KK 2: MT

Without beer we would be mere machines!

Post Reply