I just recently purchased one of these to use as my MT. It comes with a drainage tap that I would like to attach a 12" bazooka and 2 part tap too.
Has anyone done this with success (e.g. no leaks) and if so, what parts did you use and where from. I'm not sure how you go about attaching the bazooka to the tap and how to ensure a good seal at the interface inside and out.
Coleman Xtreme 36QT Mash tun.
-
barneey
- Telling imaginary friend stories
- Posts: 5423
- Joined: Mon Jul 25, 2011 10:42 pm
- Location: East Kent
Re: Coleman Xtreme 36QT Mash tun.
Hair of the dog, bacon, butty.
Hops, cider pips & hello.
Name the Movie + song :)
Hops, cider pips & hello.
Name the Movie + song :)
-
nicksonic
Re: Coleman Xtreme 36QT Mash tun.
I have done this with success, apart from what you've already got you'll need a 1/2" bsp socket like this - http://themaltmiller.co.uk/index.php?_a ... ductId=398
That'll go inside the cooler once you've removed the plastic drainage spout and will connect the thread of the tap to the thread of the filter. The fit isn't exactly perfect however my tap came with decent sized washers that were larger than the hole in the cooler which meant there weren't any gaps left.
That'll go inside the cooler once you've removed the plastic drainage spout and will connect the thread of the tap to the thread of the filter. The fit isn't exactly perfect however my tap came with decent sized washers that were larger than the hole in the cooler which meant there weren't any gaps left.