blowing liquid out of the airlock

[paulg]

I use starsan in my airlock and find many times during the first days of fermentetion the starsan foams out of the airlock due to the amount of gases being passed.It eventually runs out of liquid in the airlock.I have even tried using a blow off tube and the starsan foamed its way out off the bottle the tubes were in.

what is the solution?
different sanitiser
bigger diameter blow off tube,I used normal beer line 5/16 id
put up with it and refill airlock when required

[vacant]

I got an airlock when I started brewing but when the rate of bubbling went down I still took a gravity reading to check fermentation hadn't stalled so what's the point? Why not leave it a good number of days and then take a reading?

Well, the point is that a top hat airlock makes a very comforting sound.

I haven't used an airlock for years. The lid just rests gently on FV.

[guypettigrew]

The blow off tube from my fermenter goes into a bucket, not a bottle.
Works well, no overflowing.
Guy

20200806_111359.jpg (2.95 MiB) Viewed 4397 times

20200813_142721.jpg (2.94 MiB) Viewed 4397 times

[nallum]

What vacant typed. Airlocks are not needed during fermentation. The solution is don’t use any solution. You can still use a blowoff tube. I do on some potentially messy fermentations. If you want to monitor fermentation occasionally, just put the end of the blowoff tube in a glass of water, starsan or whatever to assess bubble rate. I sometimes use a cup of tea, if I’ve got one with me. You can get a little tea latte thing going during peak fermentation.

[IPA]

IMG_20241103_074404_306.jpg (614.39 KiB) Viewed 4338 times

I have not used an air lock for at least ten years. I use these foam bungs in my fermenting vessels. With these you can tranfer wort without removing them. Traditional airlocks and blow off tubes create pressure in the vessels which in turn creates an increase in the size of thé yeast head.

[Cobnut]

I only use an air lock if I’m fermenting in a Demi-John or carboy. In the SS conical I do what others have said here and simply rest the lid without bothering to even close the trip-clamp “hole” in the too of the lid. I also don’t fear lifting the lid to see what’s going on (even though I usually use a Tilt hydrometer to keep an eye on fermenting progress _ not actual gravity!).

Don’t sweat it!

[guypettigrew]

It'd often be too messy to leave the lid of my SS Chronical. The yeast frequently flows down the blow off tube.

AG#131.JPG (144.07 KiB) Viewed 4322 times

Guy

[Cobnut]

Get a bigger fermenter

[bitter_dave]

It seems like the issue is the starsan foaming. I use good old fashioned water in my airlock and never had a problem

[paulg]

It seems like the issue is the starsan foaming. I use good old fashioned water in my airlock and never had a problem

yes thats correct.I always worry about the airlock liquid being sucked in,but I guess that would only happen during a cold crash or during kegging

[paulg]

IMG_20241103_074404_306.jpg

I have not used an air lock for at least ten years. I use these foam bungs in my fermenting vessels. With these you can tranfer wort without removing them. Traditional airlocks and blow off tubes create pressure in the vessels which in turn creates an increase in the size of thé yeast head.

thats interesting ,not seen those before.

[paulg]

What vacant typed. [b]Airlocks are not needed during fermentation

Yet if you look at some forums,they seem paranoid about oxygen exposure,even advocating transferring from boiler to a closed, purged fermenter bottom valve .
I visited many commercial breweries with open fermenters back in the day.Sadley most of them are no more

[IPA]

IMG_20241103_074404_306.jpg

I have not used an air lock for at least ten years. I use these foam bungs in my fermenting vessels. With these you can tranfer wort without removing them. Traditional airlocks and blow off tubes create pressure in the vessels which in turn creates an increase in the size of thé yeast head.

thats interesting ,not seen those before.

Hi Paul. Here is a link to Amazon US.
https://www.amazon.com/Pieces-Stopper-P ... B091HTNF72
Somebody brought them back for me. I sterilise them in pressure cooker for five minutes

[Eric]

What vacant typed. [b]Airlocks are not needed during fermentation

Yet if you look at some forums,they seem paranoid about oxygen exposure,even advocating transferring from boiler to a closed, purged fermenter bottom valve .
I visited many commercial breweries with open fermenters back in the day.Sadley most of them are no more

It can be done easily by homebrewers with big enough fermentation vessels.

My last brew, J W Lees Best Mild by Ron Pattinson one day after pitching before first rousing.

R0010910.JPG (688.33 KiB) Viewed 4051 times

Three days later and chilling, after top crop yeast harvest the previous day to leave a thin covering for protection.

R0010911.JPG (581.81 KiB) Viewed 4051 times

Any oxygen dissolved into the wort is immediately absorbed by active yeast.

You need a traditional top fermenting yeast.

[bitter_dave]

It seems like the issue is the starsan foaming. I use good old fashioned water in my airlock and never had a problem

yes thats correct.I always worry about the airlock liquid being sucked in,but I guess that would only happen during a cold crash or during kegging

I've cold crashed beer and if the water in the airlock has ever been sucked into the beer it hasn't done any harm. A little bit of water in a sterilised airlock is unlikely to do any harm I would have thought. When I bottle I take the top off the airlock.