23 litre cornie kegs, now sensibly priced??

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Fri Mar 22, 2013 11:07 am

barneey wrote:Could you not make a boot for the keg, with one of orlando`s shoes? :flip:
Why didn't I think of that :mrgreen:
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Fri Mar 22, 2013 11:09 am

jonnyt wrote:I'm thinking about these but am concerned that the pressure rating is 40 PSI whereas Cornies are rated above 130 PSI so a massive difference.

i.e. Is the stainless thinner and thus less robust?
But force carbonation doesn't take more than 30 psi? And I don't want to do that!
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

jonnyt

Re: 23 litre cornie kegs, now sensibly priced??

Post by jonnyt » Fri Mar 22, 2013 11:18 am

Yes I know but it might be a testament as to the quality and durability of the product...

User avatar
Andy
Virtually comatose but still standing
Posts: 8716
Joined: Fri Nov 18, 2005 1:00 pm
Location: Ash, Surrey
Contact:

Re: 23 litre cornie kegs, now sensibly priced??

Post by Andy » Fri Mar 22, 2013 11:36 am

Don't the "pukka" cornie lids also have an engineered weak area tab which would blow in the event of over-pressurisation ?

I didn't see this on the Chinese design.


Edit: looking at some google images I can see some lids with such a design and some without...
Dan!

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Fri Mar 22, 2013 11:57 am

Andy wrote:Don't the "pukka" cornie lids also have an engineered weak area tab which would blow in the event of over-pressurisation ?

I didn't see this on the Chinese design.


Edit: looking at some google images I can see some lids with such a design and some without...

Care to share? I can then have a close look and see if they do.
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Fri Mar 22, 2013 2:06 pm

As this has generated quite a bit of curiosity over build quality I thought I would up load a couple more pictures.

I dismantled the two ball lock posts so you can see the dip tube and the gas inlet tube, along with the lid and removed safety release valve.


Image

I have connected it up to my gas management board and will monitor the pressure to see if it manages to hold it properly.

Image
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

jonnyt

Re: 23 litre cornie kegs, now sensibly priced??

Post by jonnyt » Fri Mar 22, 2013 2:31 pm

Now that is real beer porn!

golden brewer

Re: 23 litre cornie kegs, now sensibly priced??

Post by golden brewer » Mon Mar 25, 2013 10:15 pm

Orlando,
I have a 23 litre keg just like the ones you have purchased. I have had it four years without any problems. Mine has a sticker which says not to pressurise over 30 PSI which I have never found to be a problem. It has a pressure relief valve in the lid. I have never found a need to take the pressure up to 30 PSI. I have used this keg regularly over the four years for ales and lagers. I have never encountered any rust or pitting either.
I have another 8 Cornelieus 19 litre kegs that I use but the 23 litre keg is a great size and shape. Its height is less than the corny kegs so it fits better into a small fridge I have in my shed.
Overall I think you will be happy with them.
Cheers

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Tue Mar 26, 2013 8:10 am

Encouraging Golden. I haven't come across a sticker on it but I believe the website says to only pressure up to 40 p.s.i. Like yourself I don't see me ever deliberately testing that, but of course can't rule out operator error! :oops: There is a brew on tomorrow which is destined for one of the kegs and of course 3 more in quick succession :D
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

Fuggledog
Steady Drinker
Posts: 72
Joined: Thu Feb 10, 2011 9:19 pm

Re: 23 litre cornie kegs, now sensibly priced??

Post by Fuggledog » Fri Mar 29, 2013 10:27 pm

They look great mate. I've not got a technical/engineering opinion - but over the years using corny's and making lagers (which i know aren't your priority) i've never needed to pressurise above 15-18psi. they sound ideal. now if only i had the fridge space .... hehe.

Really like that gas management board too - is that an ebay purchase?

daddies-beer-factory

Re: 23 litre cornie kegs, now sensibly priced??

Post by daddies-beer-factory » Sat Mar 30, 2013 1:04 am

Orlando,
I am thinking of going cornie keg instead of bottles, could you just run me through your procedure (post primary)
ie achieve finish gravity for a few days, - syphon into corny with cane sugar, inject co2, then store for 2 weeks at 20 degree, chill and serve ?

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Sat Mar 30, 2013 8:18 am

Fuggledog wrote:They look great mate. I've not got a technical/engineering opinion - but over the years using corny's and making lagers (which i know aren't your priority) i've never needed to pressurise above 15-18psi. they sound ideal. now if only i had the fridge space .... hehe.

Really like that gas management board too - is that an ebay purchase?


I was having a discussion with Barneey about getting a corny keg set up and asking for advice on regulators and he sent a link to an Ebay auction for one identical to it. Unfortunately the auction had ended so I missed it he told me it was an auction Norm had started and suggested I contact him. Luckily he had a second one so I got a complete package from him, the kegs however had to come from the Home Brew shop as he didn't have any other than new 19l cornies. These were around £110, from memory, so the 23l ones are better value I thought.
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Sat Mar 30, 2013 8:32 am

daddies-beer-factory wrote:Orlando,
I am thinking of going cornie keg instead of bottles, could you just run me through your procedure (post primary)
ie achieve finish gravity for a few days, - syphon into corny with cane sugar, inject co2, then store for 2 weeks at 20 degree, chill and serve ?
That is what I intend to do. I want to treat the cornies, as much as I can, as if they were a cask beer but I will fine and condition before placing it into them and am also interested in dry hopping them using a fine mesh hop bag containing pellets. I took delivery of the freezer yesterday so need to make up the collar for it, I already have the taps, tube heater and Barneey is making up an STC 1000 for me ( [-o< ) to control the temperature, I will also get a dehumidifier as I understand this is a hazard for keezers, the other thing to consider is a computer fan but as the freezer is quite small I'm going to see if I can keep a fairly consistent temperature throughout the "chamber" without it. A fly tipper dumped a load of Kingspan on some waste ground near here ( :D it's an ill wind...) so I can clad the inside of the collar to help with insulation. Got the first brew on to fill the first cornie so 3 more to go :D

I still intend to bottle as well as I find there are some beers that work particularly well in bottle and the little shelf that contains the freezers compressor can hold a dozen bottles of beer too. :)
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

daddies-beer-factory

Re: 23 litre cornie kegs, now sensibly priced??

Post by daddies-beer-factory » Sat Mar 30, 2013 8:48 pm

orlando wrote:
daddies-beer-factory wrote:Orlando,
I am thinking of going cornie keg instead of bottles, could you just run me through your procedure (post primary)
ie achieve finish gravity for a few days, - syphon into corny with cane sugar, inject co2, then store for 2 weeks at 20 degree, chill and serve ?
That is what I intend to do. I want to treat the cornies, as much as I can, as if they were a cask beer but I will fine and condition before placing it into them and am also interested in dry hopping them using a fine mesh hop bag containing pellets. I took delivery of the freezer yesterday so need to make up the collar for it, I already have the taps, tube heater and Barneey is making up an STC 1000 for me ( [-o< ) to control the temperature, I will also get a dehumidifier as I understand this is a hazard for keezers, the other thing to consider is a computer fan but as the freezer is quite small I'm going to see if I can keep a fairly consistent temperature throughout the "chamber" without it. A fly tipper dumped a load of Kingspan on some waste ground near here ( :D it's an ill wind...) so I can clad the inside of the collar to help with insulation. Got the first brew on to fill the first cornie so 3 more to go :D

I still intend to bottle as well as I find there are some beers that work particularly well in bottle and the little shelf that contains the freezers compressor can hold a dozen bottles of beer too. :)

Thanks Orlando,
One question, with cornies - do you need to store them for 2 weeks in the warm to get the carbonation going , or do you inject co2 and drink earlier ?

User avatar
orlando
So far gone I'm on the way back again!
Posts: 7201
Joined: Thu Nov 17, 2011 3:22 pm
Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt

Re: 23 litre cornie kegs, now sensibly priced??

Post by orlando » Sun Mar 31, 2013 7:38 am

You can do either. If you go for the latter you would want to make sure your beer is already crystal before putting it in the cornie because part of this method is to pressurise to something like 30 psi then shake the beer to force the CO2 into solution. Obviously this is then going to need to stand for awhile if any yeast has gone into the cornie. As I posted I want to go the "standard" route as I want the beer to follow a traditional CAMRA style of conditioning, if you have followed the thread from the start you will also see there have been concerns raised about the integrity of the kegs welds and their ability to withstand pressure much above 30 so it would seem to be prudent too.

I should find out in a months time when the current brew is coming into serving territory.
I am "The Little Red Brooster"

Fermenting:
Conditioning:
Drinking: Southwold Again,

Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer

Post Reply